Elantec / Intersil (Intersil Corporation ) : Elantec / Intersil - Line Driver

• Complete ADSL differential driver and receiver
• 45 Vp-p differential output drive into 200X
• b60 dB typical output distortion at full output at 2 MHz
• b73 dB typical receive distortion at 15 Vp-p levels at 2 MHz
• Drives 8 single-ended video loads, or 4 S-VHS loads, or 4 differential video loads
• Power surface-mount package
  

• Complete ADSL differential driver and receiver
• 54VP-P output drive into 100&--8486; differential
• 50VP-P output drive into 50&--8486; differential
• Driver 2nd/3rd harmonics of -70dBc/-75dBc at 2VP-P into 100&--8486;
• Low supply current - 12.5mA per drive amplifier and 5mA per receive amplifier
• Standard surface-mount package
  

• High power ADSL driver
• 39.2VP-P differential output drive into 22W
• 42.4VP-P differential output drive into 65W
• Driver 2nd/3rd harmonics of -66dBc/-72dBc at 2VP-P into 100W differential
• Supply current of 12.5mA per amplifier
• Supply current control
• Power saving modes
• Standard surface-mount packages
• Ultra-small LPP package
  

• High power ADSL driver
• 39.2VP-P differential output drive into 22&--8486;
• 42.4VP-P differential output drive into 65&--8486;
• Driver 2nd/3rd harmonics of -66dBc/-72dBc at 2VP-P into 100&--8486; differential
• Supply current of 12.5mA per amplifier
• Supply current control
• Power saving modes
• Standard surface-mount packages
• Ultra-small LPP package
  

• Complete ADSL differential driver
• 45VP-P differential output drive into 200&--8486;
• -60dBc typical output distortion at full output at 2MHz
• Drives 8 single-ended video loads, or 4 S-VHS loads, or 4 differential video loads
• Power surface-mount package
  

• Complete ADSL differential driver
• 45VP-P differential output drive into 200&--8486;
• -60dBc typical output distortion at full output at 2MHz
• Drives 8 single-ended video loads, or 4 S-VHS loads, or 4 differential video loads
• Power surface-mount package
  

• Drives 360mA at 16VP-P on ±12V supplies
• 40VP-P differential output drive into 100&--8486;
• -75dBc typical driver output distortion driving 50&--8486; at 1MHz and ½-IS bias current
• Low quiescent current of 3.5mA per amplifier in ½-IS mode
• Power down disable mode
  

• 450mA output drive capability
• 43.6VP-P differential output drive into 100&--8486;
• 2nd/3rd harmonics of -85dBc/-75dBc
• MTPR of -70dB
• Operates down to 3mA per amplifier supply current
• Power control features
• Pin-compatible with EL1503C
  

• Drives up to 250mA from a +12V supply
• 20VP-P differential output drive into 100&--8486;
• -85dBc typical driver output distortion at full output at 150kHz
• Low quiescent current of 7.5mA per amplifier
  

• 40VP-P differential output drive into 100&--8486;
• -85dBc typical driver output distortion at full output at 150kHz
• Low quiescent current of 7.5mAper amplifier
  

• Drives up to 360mA from a +15V supply
• 16VP-P differential output drive into 25&--8486; and 20VP-P differential output drive into 100&--8486;
• -85dBc typical driver output distortion at full output at 150kHz
• Low quiescent current of 3.5mA per amplifier at ½-IS current mode
• Disable down to 1.5mA
  

• Drives up to 250mA from a +12V supply
• 20VP-P differential output drive into 100&--8486;
• -85dBc typical driver output distortion at full output at 150kHz
• Low quiescent current of 7.5mAper amplifier
  

• Voltage noise of only 1.9nV/rootHz
• Current noise of only 1.2pA/rootHz
• Bandwidth (-3dB) of 115MHz@AV = +2
• Gain-of-2 stable
• Just 4.8mA per amplifier
• 8-pin MSOP package
• ±2.5V to ±12V operation