- Previous: MTK-20141 DynaMiTe (TM) PCI ADSL Modem chipset
- Up: List all producers
- Next: MTK-20152 USB ADSL Modem Solution
UTOPIA (ATM) ADSL Modem Solution
The MTK-20150 is a complete ADSL modem solution consisting of an integrated
Analog Front-End (MTC-20154) and a DMT Modem and ATM Framer with
embedded ADSL Tranceiver Controller and Modem control interface (MTC-20156),
integrating the DMT/ATM digital modem and a dedicated ADSL Transceiver Controller
with associated firmware.
The MTK-20150 therefore provides all the active functions required to implement
a complete ATM-based, rate adaptive DMT ADSL modem.
The data interface is implemented as an ATM Utopia interface. A HW/FW
command and control interface (CTRLE), to communicate with external management
entities, is directly provided, without need for glue logic.
The chipset employs Discrete Multitone modulation as specified in ANSI T1.413.
It also complies with ITU G-dmt and G-Lite standards. Additional Reed Solomon
forward error correction with or without interleaving provides maximum noise
- 2 chips plus line driver
- Direct ATM interface
- Very low power dissipation (<1.1 W)
- Fully rate-adaptive
- Operation up to 26 kft (24 AWG), 18 kft (26 AWG)
- More than 8 Mbps/ 820 kbps up to 5 kft (26 AWG, 6 dB margin)
- More than 3 Mbps/ 720 kbps up to 12 kft (26 AWG, 6 dB margin) or 15.5
kft (24 AWG, 6 dB margin)
- Standard conformity
- ANSI T1.413 Issue2
- ITU G.992.1 (G.dmt)
- ITU G.992.2 (G.lite)
Documentation used to be available at:
Package: || unknown 0 Pin|
Linux support: || No |
web page used to be available at: http://www5.alcatel.com
PDF documentation used to be available at: http://www.alphamicro.net/resource/MTK20150-9905.pdf
If you are the producer of this chip and want to correct/update the presented information, please feel free to register for direct database access.