DSL ChipWeb logo

 

Chips
Modems/NICs
Links

New Chip
New Modem/NIC

Register
Login

Guestbook
News Letter

Forum

MP4 Videos
zum DSL-Test


Forum
About
?>

DSL Modem/NIC Database


  • Previous: X300 PCI X300 PCI Adapter
  • Up: List all bus-systems

    GreatSpeed (GreatSpeed, a RIAS Company ) : GS-E280D

    ADSL Ethernet Bridge

    Supporting all major ADSL standards, the GS-E280D ADSL Ethernet Bridge is specifically designed to provide remarkable performance while minimizing cost and providing an easy configuration process for end-users. Preconfigured for bridged mode in compliance with RFC1483/2684, the GS-E280D eliminates any complicated configuration process. Requiring only limited installation procedures, the bridge is ready for use after only a few simple plug-n-connect steps™. In no time, users will be able to enjoy high-speed broadband Internet access.
    Features ADSL Standards:
    • ANSI T1.413 Issue 2
    • ITU 992.1 (G.dmt), ITU 992.2 (G.Lite)
    • ITU G.994.1 (G.hs) automatic mode sensing
    Data Rates:
    • Full Rate: Up to 8Mbps downstream/640Kbps upstream
    • G.Lite: Up to 1.5Mbps downstream/512Kbps upstream
    • Automatic rate adaptation in 32Kbps steps
    ATM Standards:
    • UNI I.363.5 ATM Adaptation Layer 5 (AAL5)
    • 0-255 VPI and 0-65535 VCI address range
    • ATM Forum UNI3.1/4.0 PVC ATM signaling
    • Class of Services: UBR
    • ITU I.610 OAM F4/F5 Loopback
    WAN Protocols:
    • LLC Encapsulation and VC Multiplexing
    • IETF RFC1483/2684 Multiprotocols over ATM
    • Supports 3rd party PPPoE/RFC2516
    Bridging Protocols:
    • IEEE 802.1d Transparent Bridging
    • Spanning Tree Algorithm (STA)
    • Up to 16 Learning MAC addresses
    • Bridge filter function
    Network Management:
    • Auto-configuration of VPI/VCI and encapsulation parameters
    • FTP firmware upgrade
    Hardware Specifications:
    • LAN: Ethernet 10/100BaseT
    • WAN: RJ-11 ADSL Line
    • Power: 7.5VDC
    • Dimensions (W x L x H): 4.2" x 4.7" x 1.1" (10.7cm x 11.9cm x 2.8cm)
    LED Status Indicators:
    • Power: Solid = Power to the unit
    • Ethernet: Solid = Ethernet link detected
    • ADSL: Flashing = Establishing ADSL link Solid = Established ADSL link
    Power Requirements:
    • Input: 120VAC, 60Hz
    • Output: 7.5VDC, 1000mA, 7.5W
    Certification:
    • FCC part 15 class B
    • CE
    System Requirements :
    • Any computer with an Ethernet 10/100 RJ-45 interface
    • Any operating system that supports an Ethernet connection with an IP stack
    • ADSL and Internet service from your local telephone company or Internet Service Provider (ISP)
    Package Contents:
    • GS-E280D ADSL Ethernet Bridge
    • RJ-45 Ethernet cable
    • RJ-11 ADSL Cable
    • Power adapter
    • Getting Started Guide

    Specifications are subject to change without notice.


    Information used to be available at:

    http://www.greatspeed.com/products/gs-e280dspecs.htm and
    http://www.greatspeed.com/pdf/specs/gs-e280d.pdf

    Technology: ADSL (G.992.1)
    Linux support: No
    Price per Modem/NIC:  US$80.99


    external WWW: GreatSpeed, a RIAS Company : http://www.greatspeed.com/products/gs-e280dspecs.htm web page used to be available at: http://www.greatspeed.com/products/gs-e280dspecs.htm


    external PDF: GreatSpeed, a RIAS Company : http://www.greatspeed.com/pdf/specs/gs-e280d.pdf PDF documentation used to be available at: http://www.greatspeed.com/pdf/specs/gs-e280d.pdf
    If you are the producer of this modem / NIC and want to correct/update the presented information, please feel free to register for direct database access.
ChipWeb Home

Last update: 14.11. 2009
Last link check: 01.03. 2006
All registered names and trademarks are the property of their respective owners.
No guarantee is given and no responsibility is taken for the information provided.
© 2017     Thomas Martin Knoll   knoll@chipweb.de
100G Ethernet
Next Generation SDH
BGP-QoS.org
Life Cycle Costing (LCC)
back Kirche Reichenbach Vogtland Life-cycle cost (LCC) calculations