ATM ChipWeb logo

 

Chips
NICs
Links

New Chip
New NIC

Register
Login

Guestbook
News Letter

Forum
About

ATM Chip Database


  • Previous: ATMizer II
  • Up: List all categories
  • Next: KeyStream - Access Controller

  • Fujitsu (Fujitsu Microelectronics Europe ) : MB 86687

    Adaption Layer Controller ALC

    The MB86687 is an ATM protocol controller which autonomously terminates ATM Adaptation Layer standards Type 3/4 and Type 5. Streaming and message modes as defined for AAL 3/4 and AAL5 are supported. User data packets are transferred to and from shared data structure memory via a high speed intelligent DMA controller with a 32 bit data Bus. The device supports simultaneous segmentation and reassembly on up to 1024 virtual circuits (VCs). Shared data structures are stored in SAR memory which can be either dual-port or a partition of system memory. Segmentation packets and packets being reassembled may also be stored in dual-port memory. In addition external data structures are also stored in SAR memory and may be accessed via the DMA controller. In non-demanding applications, system memory can be used as SAR memory. The ALC device supports two transparent modes. In transparent payload mode the 48 byte ATM cell payload is received or transmitted transparently into or from SAR memory. In transparent cell mode the ATM cell is received or transmitted transparently into or from SAR memory. Other features include:

    • Support for up to 12 peak segmentation rates with sub-ratios of 0.5 and 0.25 of peak
    • rates selectable on a per-VC basis
    • Programmable peak and average rates with leaky-bucket averaging on total ALC
    • cell stream output.
    • UTOPIA v2.01 Compatible cell stream interface with optional HEC checking on receive and HEC octet disabled modes
    • Flexible routing tag append / remove mode for direct ATM Switch connection
    • Supports Intel and Motorola modes, including line transfers (i.e. single cycle bursts)
    • Internal cache to store header info and traffic parameters for up to 128 VCs
    • Packaged in 208-pin plastic quad flat pack
    • JTAG complient
    The leaky-bucket algorithm is used to shape the transmit data characteristics on a per-virtual-circuit basis by controlling the average rate of cell transmission and the length of each burst of cell generated. In addition to the traffic shaping applied to the traffic transmitted from each virtual circuit, the ALC can manage both the peak and average transmission rate on the total ALC output traffic.

    System Configurations

    In adapter card applications, the ALC interfaces to the Fujitsu MB86683 NTC or other device via a full duplex 8 bit wide UTOPIA compatible cell stream interface for connection to the transmission medium. In a hub or router application, the ALC connects directly to the Fujitsu MB86680 SRE for autonomous routing. In this case a programmable 0-3 byte tag can be appended to each cell. Alternatively it may be connected to a proprietary backplane architecture.

    Technology: unknown
    Package: PQFP 208 Pin


    external WWW: http://www.fml.co.uk


    external PDF: Fujitsu Microelectronics Europe : http://www.fml.co.uk/flyer/87a_fly.pdf PDF documentation used to be available at: http://www.fml.co.uk/flyer/87a_fly.pdf
    If you are the producer of this chip and want to correct/update the presented information, please feel free to register for direct database access.
ChipWeb Home

Last update: 14.11. 2009
Last link check: 01.03. 2006
All registered names and trademarks are the property of their respective owners.
No guarantee is given and no responsibility is taken for the information provided.
© 2017     Thomas Martin Knoll  knoll@chipweb.de
100G Ethernet
Next Generation SDH
BGP-QoS.org
back Kirche Reichenbach Vogtland