ATM ChipWeb logo

 

Chips
NICs
Links

New Chip
New NIC

Register
Login

About

ATM NIC Database


  • Previous: ATM 622 SunATM 2.0 SBus Adapter
  • Up: List all bus-systems
  • Next: ATM155-SSC

  • Sican (Sican GmbH ) : ATM155-PSC

    ATM Tranparent Multimedia Interface Specification

    (ATMIS?) ATMIS? is an interface between the ATM device driver and the upper SW stack. It is located between the AAL layer and upper layers respective the ATM reference model. This interface enables very fast data transport especially for ATM traffic beside the usual TCP/IP stack.
    The ATMIS? interface makes PSC the ideal ATM adapter card for high bitrate and/or realtime Multimedia data.


    PCI Interface AAL5 SAR

    All necessary functions for variable bit rate data transfer (AAL5 and AAL3/4) are performed in the hardware. Transparent AAL0 frame processing for constant bit rate services is executed in hard- and software. Located on a half-size PCI card, the segmentation and reassembly device provides optimized ATM cell and AAL5, AAL3/4 and OAM frame functions.

    Windows/NT Driver

    The Microsoft Windows NT®-based ATM software offers trans-parent support for the NDIS 3.0® protocol stack and a general purpose program-ming inter-face that provides direct access to the ATM specific network features. The software is ready to support evolving standards.

    SONET/SDH Chip (STS-3/STM-1)

    The adaptor card contains a single chip receiver/transmitter for transporting 53-Byte ATM cells at SDH/STM-1 and SONET/STS-3c data speeds of 155 Mbps. Electromagnetic interference is significantly reduced by an on-chip clock circuit that generates a system clock of 155 MHz from a 19 MHz oscillator.

    SC Duplex Transceiver

    A SC connector interfaces to a duplex 62.5/125µ multimode fibre (2 km max.). Other examples of physical media interfaces are available upon demand.

    PCI-Configuration

    The PCI SAR provides internal PCI configuration registers to support its initialization and error-handling functions.

    Standards Compliance

    • ATM cell processing per ANSI T1.627; ITU-T I.361, I.363 and ATM Forum UNI v3.1 specification
    • ATM Forum LAN Emulation v1.0
    • PCI local bus specification v2.0
    • PCI local bus specification v2.0

    Environment

    • Operating Temp.: 0°C - 70°C
    • Humidity: 5%-95% noncondsng.

    Our network interface cards should be considered as a basic solution that we will adapt to your environment. No matter if your network infrastructure consists of copper wiring or if you need a specific interface on ATM for your preferred application, we will provide you with the optimal access to broadband networking.

    Control Memory

    The architecture of the device supports VBR and UBR traffic. Using 256 KByte of local control memory, the ATM155-PSC offers support of up to 1023 virtual circuits on the transmit side and up to 1023 virtual circuits on the receive side. Each virtual circuit can be individually configured for bit rate and AAL type.

    Host RAM

    For data transfers, the device accesses direct memory access master transfers with 32 and 16 byte bursts. Host memory data buffers are efficiently managed by descriptor rings and scatter-gather data transfers. The software device driver provides a packet-level interface and makes ATM functionality trans-parent for the user.


    Technical Specifications

    The ATM155-PSC is compatible to any PCI-based platform equipped with one available, fully-PCI compliant slot and running under Windows NT 3.5®. It requires at least a 486 processor and 16 MBytes of memory.

    • PCI Clock: 25 - 33 MHz
    • Max. PCI Burst Rate: 80 MByte/s
    • Dimensions: Short single PCI slot
    • Power Consumption: 1 A max. @ +5 V

    Features:

    • Fully compliant with ATM Forum UNI v3.1
    • Windows NT® 3.5 operating system support
    • Implementation of the new ATM Forum LAN emulation standard for transparent support for existing ethernet and token ring environments
    • Supports up to 1023 VCs on the transmit side and 1023 VCs on the receive side
    • Features ATM Adaptation Layer for variable bit rate services
    • Onboard SAR chip performs full duplex ATM and AAL processing
    • Packets in the host memory are directly accessed by 32 bit PCI master transfers
    • High performance SONET/STS3c and SDH/STM1 physical layer interface
    • Supports full duplex 155 Mbps data transmission over 62.5/125µ multimode fiber
    • Fully compatible with the PCI bus specifications and designed for the PCI plug & play concept

    Documentation used to be available at:
    http://www.sican.de/homepage/systems_solutions/hi_speed_datakom/page2.html


    external WWW: Sican GmbH : http://www.sican.de/homepage/systems_solutions/hi_speed_datakom/page2.html web page used to be available at: http://www.sican.de/homepage/systems_solutions/hi_speed_datakom/page2.html


    If you are the producer of this NIC and want to correct/update the presented information, please feel free to register for direct database access.
ChipWeb Home

Last update: 14.11. 2009
Last link check: 01.03. 2006
All registered names and trademarks are the property of their respective owners.
No guarantee is given and no responsibility is taken for the information provided.
© 2024     Thomas Martin Knoll  knoll@chipweb.de   Impressum   Datenschutz
back Kirche Reichenbach Vogtland